Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual / Advanced Driver Assistance System (ADAS) / Description and Operation

Hyundai Santa Cruz: Advanced Driver Assistance System (ADAS) / Description and Operation

- Description System Description Advanced Driver Assistance System (ADAS) analyzes the exterior environment of a vehicle and driver status to provide visibility / display / guide / warning for driving and parking.System Configuration

Item		Function	Explanation	Unit
Item		Function	Explanation	Front Radar	Front View Camera	Rear Corner Radar	Rear View Camera	ADAS_PRK	Navi
Driving	Safety	FCA	Forward Collision-Avoidance Assist	●	●
		LKA	Lane Keeping Assist	●	●
		BCW	Blind-Spot Collision Warning			●
		BCA	Blind-Spot Collision-Avoidance Assist		●	●
		MSLA	Manial Speed Limit Assist
		ISLA	Intelligent Speed Limit Assist		●
		DAW	Driver Attention Warning		●
		SEW	Safety Exit Warning			●
		BVM	Blind-spot View Monitor					●
		HBA	High Beam Assist		●
	Convenience	SCC	Smart Cruise Control	●	●
		NSCC	Navigation-based Smart Cruise Control	●	●				●
		LFA	Lane Following Assist		●
		HDA	Highway Driving Assist	●	●
Parking Safety/Convenience		RVM	Rear View Monitor				●
		SVM	Surround View Monitor					●
		RCCW	Rear Cross-Traffic Collision Warning			●
		RCCA	Rear Cross-Traffic Collision-Avoidance Assist			●

Advanced Driver Assistance System (ADAS)

...

Special Service Tools

- Special Service Tools Tool Name / NumberIllustrationDescription Front View Camera Compensator(09890-3V100) Used for compensating front view camera unit Vertical measuring instrument(09964-C1200 ...

Other information:

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Warning Indicator
- Components 1. BCW Indicator2. SVM Camera - Inspection 1.Disconnect the negative (-) battery terminal. 2.Remove the front door trim.(Refer to Body - "Front door trim") 3.Disconnect the power door mirror connector from the harness BCW indicator - Removal 1.Disconnect the n ...

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Relay Box (Engine Compartment)
- Inspection Power Relay (Type A) 1.There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals. 2.There should be no continuity between the No.30 and No.87 terminals when power is disconnected.[Engine room relay box] ...