Hyundai Santa Cruz: Body (Interior and Exterior) / Roof Trim

Cowl Cross Bar Assembly

- Component Location 1. Cowl cross bar assembly - Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prev ...

Sunvisor

- Component Location 1. Sunvisor2. Retainer - Replacement [Sunvisor] 1.Remove the sunvisor pivot cover (A). 2.Loosen the mounting screw and remove the sunvisor (A). 3.To install, ...

Other information:

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Starter Relay
- Inspection 1.Turn ignition switch OFF and disconnect the battery negative (-) terminal. 2.Remove the fuse box cover. 3.Remove the starter relay (A). 4.Check for continuity between the terminals (30 and 87) using an ohmmeter.TerminalResistanceMeasure 30 - 871 MΩ or higherIf there is con ...

Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Impact Sensor (FIS)
- Description • The front impact sensors (FIS) are installed on the upper of the side panel in Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at their mounting locations. • The primary purpose of the Front Impact Sensor (FIS) is to provid ...