Seat warmers are provided to warm the front seats during cold weather.
During mild weather or under conditions where the operation of the seat warmer is not needed, keep the seat warmers OFF.
WARNING
The seat warmers can cause a SERIOUS BURN, even at low temperatures and especially if used for long periods of time.
Passengers must be able to feel if the seat is becoming too warm so they can turn it off, if needed.
People who cannot detect temperature change or pain to the skin should use extreme caution, especially the following types of passengers:
WARNING
NEVER place anything on the seat that insulates against heat when the seat warmer is in operation, such as a blanket or seat cushion. This may cause the seat warmer to overheat, causing a burn or damage to the seat.
NOTICE
To prevent damage to the seat warmers and seats:

While the engine is running, push either of the switches to warm the driver's seat or front passenger's seat.
During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position.
• Manual temperature control
Each time you push the switch, the temperature setting of the seat is changed as follows:
- Front seat

- Rear seat

• Automatic temperature control
The seat warmer starts to automatically control the seat temperature in order to prevent low-temperature burns after being manually turned ON.
- Front seat

- Rear seat

If HIGH temperature is manually selected again, the temperature will be controlled automatically.
For more details, refer to the separately supplied Infotainment manual with your vehicle.
Information
With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature.
Rear seat head restraint
Air Ventilation SeatHyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Special Service Tools
- Special Tools
Tool (Number and name)IllustrationUse
09977-3R000Clutch bolt remover
Removal and installation of clutch bolt
...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Description and Operation
- Description
It's a system that uses illumination sensor to automatically turn ON
the tail lamp and head lamp based on the change in surrounding
environment's illumination condition. It activates when the vehicle
enters/exits tunnel, or when the illumination condition in surrounding
envi ...