Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: 4 Wheel Drive (4WD) System / Specifications

- Specifications

Tightening Torques

ItemsN.mKgf.mlb-ft
Transfer assembly mounting bolts60.8 - 65.76.2 - 6.744.8 - 48.5
4WD ECM mounting nuts9.8 - 11.81.0 - 1.27.2 - 8.7
Coupling assembly mounting bolts56.9 - 64.75.8 - 6.642.0 - 47.7
Propeller shaft mounting bolts49.0 - 68.65.0 - 7.036.2 - 50.6
Transfer oil drain plug39.2 - 58.84.0 - 6.028.9 - 43.4
Transfer oil filler plug39.2 - 58.84.0 - 6.028.9 - 43.4
Hydraulic motor mounting bolt9.8 - 11.81.0 - 1.27.2 - 8.7
Pressure sensor mouting bolt10.8 - 14.71.1 - 1.5 7.9 - 10.8

- Lubricants
TypeItemsSpecificationCapacity
[A]Transfer oilAPI GL-5, SAE75W/85 Hypoid gear oil
(SK HCT-5 75W85 equivalent)
Filled up to lower filler plug thread level.
0.5L ± 0.0225L
(0.13 U.S gal, 0.52 U.S qt, 0.44 lmp qt) ± (0.01 U.S gal, 0.03 U.S qt, 0.02 lmp qt)
[B]0.65 L (0.17 U.S.gal, 0.69 U.S.qt, 0.57 lmp,qt)
ALLCoupling oilTL7300-SHELL TF0870380ml ± 19ml
(0.10 U.S.gal., 0.40 U.S.qt, 0.33 Imp.qt.) ± (0.005 U.S.gal., 0.02 U.S.qt, 0.01 Imp.qt.)

    Troubleshooting
    - Trouble shooting Area of leakage occuringAreaType ① Connecting part/under part of transfer case② Connecting part of transmission [A] ① Connecting part/under part of transfer case② Conne ...

    Special Service Tools
    - Special Service Tools TypeTools(Number and name)IllustrationUse [A]Oil seal installer 09473-D3600 Used for installing the transfer case oil seal (Driveshaft side)(Used with the handle) Handle0 ...

    Other information:

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Electronic Parking Brake (EPB)
    - Description The electronic parking brake (EPB) is different from existing parking systems which operated with the brake pedal or the lever type. The EPB system sends the signal to the ECU when a driver operates the EPB switch. The ECU operates the EPB actuator composed with motor gears. T ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Engine Cover
    - Removal and Installation 1.Remove the engine cover (A).     • To avoid damage, remove the engine cover on room temperature. • Do not disengage both front and rear mounting point at the same time. 2.Install in the reverse order of removal. ...

    © 2023-2025 Copyright www.hysacr.com