Hyundai Santa Cruz: Tires and Wheels / Wheel Alignment and Tire Balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset.
If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced.
NOTICE
Incorrect wheel weights can damage your vehicle’s aluminum wheels. Use only approved wheel weights.
Tire Rotation
To equalize tread wear, HYUNDAI
recommends that the tires
be rotated according to the
maintenance schedule or sooner if
irregular wear develops.
During rotation, check the tires for
correct balan ...
Tire Replacement
If the tire is worn evenly, a tread
wear indicator will appear as a solid
band across the tread. This shows
there is less than 1/16 inch (1.6mm) of
tread left on the tire. Replace the tire
when ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Pressure Sensor
- Description
The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an
oil pressure. And then it presses a multiple disk clutch and transfers
the generated torque into rear wheels. Its torque value varies according
to a pressure status. • Component location
- Circuit Di ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rear Seat Cushion Cover
- Component Location
1. Rear seat cushion cover [RH]2. Rear seat cushion cover [LH]
- Replacement
• Put on gloves to prevent hand injuries.
• Take care not to bend or scratch the rear seat assembly.
[LH]
1.Remove the rear seat cushion as ...
