Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Smart Key / Battery replacement

If the Smart Key is not working properly, try replacing the battery with a new one.

Battery Type: CR2032

To replace the battery:

Battery Type: CR2032

To replace the battery:

1. Remove the mechanical key.

2. Use a slim tool or utility blade to pry open the cover of the smart key. Use caution not to damage the smart key.

3. Remove the old battery and insert the new battery. Make sure the battery position is correct.

4. Reinstall the rear cover of the smart key.

If you suspect your smart key might have sustained some damage, or you feel your smart key is not working correctly, contact an authorized HYUNDAI dealer.

Information

An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations.

    Smart key precautions
    The smart key may not work if any of the following occur: The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the ...

    Immobilizer System
    The immobilizer system helps protect your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled. When the ignition switch is turned on (or ...

    Other information:

    Hyundai Santa Cruz 2021-2025 Owners Manual: Safe Exit Warning Settings
    Setting features Safe Exit Warning With the engine on, select 'Driver Assistance>Blind-Spot Safety>Safe Exit Warning' from the Settings menu to turn on Safe Exit Warning and deselect to turn off the function. WARNING The driver should always be aware of his or her surroundings. If ‘Safe ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rail Pressure Sensor (RPS)
    - Description Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous fuel pressure in the delivery pipe. The sensing element (semiconductor element) built into the sensor converts the pressure to voltage signal. By using this signal, the ECM controls the ...

    © 2023-2025 Copyright www.hysacr.com