Hyundai Santa Cruz: Driving Safety / Driver Attention Warning (DAW)
Basic function
Driver Attention Warning can help determine the driver's attention level by analyzing driving pattern and driving time while the vehicle is driven. Driver Attention Warning will recommend a break when the driver’s attention level falls below a certain level.
Leading Vehicle Departure Alert function
Leading Vehicle Departure Alert function will inform the driver when a detected vehicle in front departs from a stop.
Detecting sensor
.jpg)
[1] : Front view camera
The front view camera is used to help detect driving patterns and front vehicle departure while vehicle is being driven.
Refer to the picture above for the detailed location of the detecting sensor.
CAUTION
- Always keep the front view camera in good condition to maintain optimal performance of Driver Attention Warning.
- For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7.
- Driver Attention Warning Settings
- Driver Attention Warning Operation
- Driver Attention Warning Malfunction and Limitations
Intelligent Speed Limit Assist
Malfunction and Limitations
Intelligent Speed Limit Assist
malfunction
When Intelligent Speed Limit Assist is
not working properly, the ‘Check Speed
Limit system’ warning message appears
on the cluster for several secon ...
Driver Attention Warning
Settings
Setting features
Driver Attention Warning
With the engine on, select 'Driver Assistance>Driver Attention Warning'
from the Settings menu to set whether to
use each function.
- If ‘Inattentive ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Repair procedures
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the inside rear view mirror cover (A) and (B).
3.Disconnect the inside rear view mirror connector (A).
4.Loosen the mounted screws and push the ECM mirror base upward to remove the ECM mirror assembly (A).
- Inspection ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Cluster Fascia Panel
- Component Location
[Supervision cluster]
1. Cluster fascia panel
[General cluster]
1. Cluster fascia panel
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• ...
