Setting features
Speed limit
With the engine on, select or deselect 'Driver Assistance>Speed Limit' from the Settings menu to set whether to use each function.
- If ‘Speed Limit Assist’ is selected,
Intelligent Speed Limit Assist informs
the driver of speed limit. In addition,
Intelligent Speed Limit Assist informs
the driver to change set speed of
Manual Speed Limit Assist or Smart
Cruise Control to help the driver stay
within the speed limit.
- If ‘Speed Limit Warning’ is selected,
Intelligent Speed Limit Assist informs
the driver of speed limit. In addition,
Intelligent Speed Limit Assist warns
the driver when the vehicle is driven
faster than the speed limit.
- If ‘Off’ is selected, Intelligent Speed
Limit Assist turns off.
CAUTION
If ‘Speed Limit Warning’ is selected, Intelligent Speed Limit Assist will not inform the driver to adjust set speed.
Speed Limit Offset
With the engine on, when 'Driver Assistance>Speed Limit>Speed Limit Offset' is selected, the Speed Limit Offset can be changed. Speed Limit Warning and Speed Limit Assist will operate by applying the Speed Limit Offset setting to the detected speed limit.
WARNING
Information
The setting of 'Speed Offset' is not reflected in Navigation-based Smart Cruise Control (NSCC).
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rear Combination Lamp
- Removal
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take care not to bend or scratch the bumper cover and panels.
...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: AC Inverter Oultet
- Components
- Removal
1.Disconnect the negative (-) battery terminal.
2.Open the bed side trim tray (A).
3.Loosen the mounting screws and remove the AC inverter power outlet (A).
4.Disconnect the AC inverter power outlet connector (A).
- Installation
1.Install the AC invert ...