WARNING
Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by an authorized HYUNDAI dealer. ALWAYS follow these precautions for performing maintenance work:
WARNING
Touching metal parts
Do not touch metal parts (including strut bars) while the engine is operating or hot. Doing so could result in serious personal injury. Turn the engine off and wait until the metal parts cool down to perform maintenance work on the vehicle.
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle.
Any adverse conditions should be brought to the attention of your dealer as soon as possible.
These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts and lubricants used.
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Pillar Trim
- Component Location
1. Front pillar trim
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Take ca ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Hood Weatherstrip
- Replacement
• Be careful not to scratch the hood weatherstrip.
1.Remove the hood weatherstrip (A).
2.To install, reverse removal procedure.
• Replace any damaged clips (or pin-type retainers).
...