Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Safe Exit Warning (SEW) / Safe Exit Warning Malfunction and Limitations

Safe Exit Warning malfunction

When Safe Exit Warning is not working properly, the ‘Check Blind-Spot Safety system’ warning message appears on the cluster for several seconds, and the master () warning light illuminates on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

When the side view mirror warning light is not working properly, the ‘Check side view mirror warning light’ warning message appears on the cluster for several seconds, and the master () warning light illuminates on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.

Safe Exit Warning disabled

When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Safe Exit Warning.

If this occurs, the ‘Blind-Spot Safety system disabled. Radar blocked’ warning message appears on the cluster.

Safe Exit Warning will operate properly when such foreign material or trailer, etc., is removed, and then the engine is restarted.

If Safe Exit Warning does not operate properly after it is removed, have the vehicle inspected by an authorized HYUNDAI dealer.

WARNING

  • Even though the warning message does not appear on the cluster, Safe Exit Warning may not properly operate.
  • Safe Exit Warning may not properly operate in an area (for example, open terrain) where any objects are not detected right after the engine is turned on, or when the detecting sensor is blocked with foreign material right after the engine is turned on.

CAUTION

Turn off Safe Exit Warning to install or remove a trailer, carrier, or another attachment. Turn on Safe Exit Warning when finished.

Limitations of Safe Exit Warning

Safe Exit Warning may not operate properly, or it may operate unexpectedly under the following circumstances:

  • Getting out of the vehicle where trees or grass are overgrown
  • Getting out of the vehicle where the road is wet
  • The approaching vehicle is very fast or very slow

Information

For more details on the limitations of the rear corner radar, refer to “Blind-Spot Collision-Avoidance Assist (BCA)” section in this chapter.

WARNING

  • Safe Exit Warning may not operate properly if interfered by strong electromagnetic waves.
  • Safe Exit Warning may not operate for 3 seconds after the vehicle is started, or rear corner radars are initialized.
    Safe Exit Warning Operation
    Safe Exit warning Collision warning when exiting vehicle When an approaching vehicle from the rear is detected at the moment a door is opened, the ‘Watch for traffic’ warning message appe ...

    Manual Speed Limit Assist (MSLA)
    (1) Manual Speed Limit Assist enabled indicator (2) Set speed You can set the speed limit when you do not want to drive over a specific speed. If you drive over the preset speed limit, Manual Spee ...

    Other information:

    Hyundai Santa Cruz 2021-2024 Owners Manual: User Settings Mode
    In this mode, you can change the settings of the instrument cluster, doors, lamps, etc. 1. Driver Assistance 2. Cluster 3. Lights 4. Door 5. Convenience 6. Units Quick guide (Help) This mode provides quick guides for the systems in the User Settings mode. Select an item, press and hold the OK ...

    Hyundai Santa Cruz 2021-2024 Owners Manual: Forward Collision-Avoidance Assist Operation
    Basic function Warning and control The basic function of Forward Collision Avoidance Assist is to help warn the driver and, if necessary, control the vehicle to help mitigate a collision. The following warning messages may be displayed depending on the collision risk level. Collision Warning ...

    © 2023-2024 Copyright www.hysacr.com