To install a LATCH-compatible Child Restraint System in either of the rear outboard seating positions:
1. Move the seat belt buckle away from the lower anchors.
2. Move any other objects away from the anchorages that could prevent a secure connection between the Child Restraint System and the lower anchors.
3. Place the Child Restraint System on the vehicle seat, then attach the seat to the lower anchors according to the instructions provided by the Child Restraint System manufacturer.
4. Follow the instructions of the Child Restraint System’s manufacturer for proper installation and connection of the lower attachments on the Child Restraint System to the lower anchors.
WARNING
Take the following precautions when using the LATCH system:
NOTICE
The recommended weight for the LATCH system is under 65 lb. (30 kg).
How to determine an appropriate child restraint weight: Child weight + Child restraint weight < 65 lb. (30kg)
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Heater Control Unit
- Components Location
1. Heater control unit
- Terminal Function
Connector Pin Function
Pin NoConnector AConnector B
1Mode control actuator feedbackGround
2Intake actuator feedbackSensor ground
3Passenger's temperature control actuator feedbackECV (-)
4Driver's temperature contr ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Seat Back Cover
- Component Location
1. Front seat back cover
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
• Tak ...