Hyundai Santa Cruz: Driveshaft and axle / Special Service Tools
| Tool(Number and Name) | Illustration | Use |
| Ball joint remover 09568-2J100 |
| Removal of the tie rod end ball joint. |
| Lower arm ball joint remover 09568-4R100 |
| Removal of the lower arm ball joint. |
| Band installer 0K495-C5000 |
| Used for installing ear type boot band |
| Band installer 09495-39100 |
| Used for installing hook type boot band |
| Differential bearing remover 09501-C9200 |
| Used for removal of differential gear bearing |
| Differential assembly working stand base 09501-C9231 |
| Used for working on the differential carrier assembly (Use with 0K530-P2500, 0K501-P2232) |
| Rear differential assembly working stand adapter 0K530-P2500 |
| Used for working on the differential carrier assembly (Use with 09501-C9231, 0K501-P2232) |
| Sub support 0K501-P2232 |
| Used for working on the differential carrier assembly (Use with 09501-C9231, 0K530-P2500) |
| Bearing remover 09501-C9310 |
| Used for removal of the bearing (Use with 09452-2E000) |
| Bearing remover 09452-2E000 |
| Used as main body when removing the bearing (Use with 09501-C9310) |
| Bearing race remover (Main body) 09501-C9140 |
| Used for removal of the bearing race (Main body only) |
| Bearing race remover 09501-C9320 |
| Used for removal of the outside bearing race |
| Bearing race remover 09501-C9330 |
| Used for removal of the inside bearing race |
| Rear differential bearing installer 0K530-P2300 |
| Used for installing the differential gear bearing |
| Rear differential bearing installer 0K530-P2200 |
| Used for installing the pinion bearing race |
| Pinion bearing race installer 09501-C9340 |
| Removal & Installation of the differential assembly warking stand. |
| Pinion oil seal installer 0K530-P2100 |
| Used for installing the pinion oil seal (Use with 09231-H1100) |
| Differential oil seal installer 09501-C9190 |
| Used for installing differential case side oil seal (Use with 09231-H1100) |
| Handle 09231-H1100 |
| Using with 0K530-P2100, 09501-C9190 |
| Backlash measurement supporter 0K530-P2400 |
| Used to measure the backlash |
Specifications
- Specification
ItemsInner sideOuter side
Front driveshaftJoint type2.5 GDI : HLSJ100 2.5 T-GDI : HLSJ104 2.5 GDI : BJ100c2.5 T-GDI : BJ104c
Max. permissible angle23°45°
Rear driveshaftJoint ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rear Assist Arm
- Removal
• When lifting a vehicle using a lift, be careful not to damage
the lower parts of the vehicle (floor under cover, fuel filter, fuel
tank, canister).(Refer to General Information - "Lift and Support
Points")
1.Loosen the rear wheel nuts slightly.Raise the v ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Bed Gas Lifter
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Using a screwdriver, lift up slightly the socket clips (A) of both
ends on the l ...
