Hyundai Santa Cruz Owners & Service Manuals
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual / Driveshaft and axle / Specifications

Hyundai Santa Cruz: Driveshaft and axle / Specifications

- Specification

ItemsInner sideOuter side
Front driveshaftJoint type2.5 GDI : HLSJ100
2.5 T-GDI : HLSJ104 		2.5 GDI : BJ100c
2.5 T-GDI : BJ104c
Max. permissible angle23°45°
Rear driveshaftJoint typeTJ79BJ79
Max. permissible angle23°30°
Rear differentialOil typeHypoid gear oil API GL-5, SAE 75W/85
(SK HCT-5 gear oil 75W85 equivalent)
OIL capacity (L)0.58 ± 0.05
Gear typeHypoid
Diff ratio2.533
Hypoid gear backlash0.07 - 0.15 mm (0.0028 - 0.0059 in.)
Diff gear backlash0.01 - 0.06 mm (0 - 0.0023 in.)

Tightening torque
ItemsN.mkgf.mlb-ft
FrontTire wheel hub nut107.9 - 125.511.0 - 13.079.6 - 94.0
Driveshaft castle nut294.2 - 313.830.0 - 32.0217.0 - 231.5
Strut assembly lower mounting bolt 235.2 - 254.824.0 - 26.0 173.6 - 188.0
Brake caliper mounting bolt98.1 - 117.710.0 - 12.072.3 - 86.8
Wheel speed sensor mounting bolt6.9 - 10.80.7 - 1.15.1 - 8.0
Brake disc mounting screw4.9 - 5.90.5 - 0.63.6 - 4.3
Hub assembly mounting bolt127.5 - 147.213.0 - 15.094.0 - 108.5
Upper roll rod bracket bolt(A) 107.9 - 125.511.0 - 13.079.6 - 94.0
(B) 49.0 - 63.75.0 - 6.536.2 - 47.0
Lower arm ball joint mounting bolt98.1 - 117.710.0 - 12.072.3 - 86.8
Tie rod end ball joint mounting nut98.1 - 117.710.0 - 12.072.3 - 86.8
RearTire wheel hub nut107.9 - 125.511.0 - 13.079.6 - 94.0
Driveshaft castle nut294.2 - 313.830.0 - 32.0217.0 - 231.5
Shock absorber lower mounting nut156.9 - 176.616.0 - 18.0115.7 - 130.1
Brake caliper mounting bolt78.5 - 98.18.0 - 10.057.9 - 72.3 
Wheel speed sensor mounting bolt8.8 - 13.70.9 - 1.46.5 - 10.1
Brake disc mounting screw4.9 - 5.90.5 - 0.63.6 - 4.3
Hub assembly mounting bolt88.2 - 107.89.0 - 11.065.1 - 79.5
Upper arm mounting bolt156.9 - 176.516.0 - 18.0115.7 - 130.2
Lower arm mounting bolt156.9 - 176.516.0 - 18.0115.7 - 130.2
Assist arm mounting bolt156.9 - 176.516.0 - 18.0115.7 - 130.2
Trailing arm mounting bolt98.1 - 117.710.0 - 12.072.3 - 86.8
Propeller shaftFront propeller shaft mounting bolt53.9 - 68.65.5 - 7.039.7 - 50.6
Propeller shaft center bearing bracket mounting bolt53.9 - 68.65.5 - 7.039.7 - 50.6
Rear propeller shaft mounting bolt53.9 - 68.65.5 - 7.039.7 - 50.6
Rear DifferentialRear differential mounting bolt78.5 - 88.38.0 - 9.057.9 - 65.1
Differential cover mounting bolt39.2 - 49.04.0 - 5.028.9 - 36.2
Rear differential drain plug49.0 - 68.65.0 - 7.036.2 - 50.6
Rear differential filler plug39.2 - 58.84.0 - 6.028.9 - 43.4

- Lubricants
ItemsLubricantsQuantity
Front driveshaftBJ 100c (GDI)RBA120 (+10/0)g
BJ 104c (T-GDI)130 (+10/0)g
HLSJ 100 (GDI)SH06-VX21LH : 200(+10/0)g
RH : 205(+10/0)g
HLSJ 104 (T-GDI)LH : 220(+10/0)g
RH : 230(+10/0)g
Rear driveshaftBJ 79BM71-141KR60 (+10/0)g
TJ 79SH06-VX2190 (+10/0)g

    Driveshaft and axle
    ...

    Special Service Tools
    - Special Service Tools Tool(Number and Name)Illustration Use Ball joint remover09568-2J100 Removal of the tie rod end ball joint. Lower arm ball joint remover09568-4R100 Removal of the lower arm ...

    Other information:

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rear Combination Lamp
    - Removal     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries.     • Take care not to bend or scratch the bumper cover and panels. ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Back-up Lamps
    - Removal 1.Disconnect (-) battery terminal. 2.Remove the rear bumper assembly.(Refer to Body - "Rear Bumper Assembly") 3.Disconnect the back-up lamp connector (A) and remove the mounting clips. 4.Loosen the mounting screws, push the clip (B) and remove the back-up lamp (A). - Installa ...

    © 2023-2025 Copyright www.hysacr.com