Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Emission Control System / Specifications

- Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification

ItemSpecification
Coil Resistance (Ω)20.0 - 22.0 [20°C (68°F)]

Fuel Tank Pressure Sensor (FTPS) ▷ Type : Piezo-Resistive Pressure Sensor▷ Specification
Pressure (kPa)Output Voltage (V) [Supply Power = 5V]
-6.670.5
02.5
6.674.5

Canister Close Valve (CCV) ▷ Specification
ItemSpecification
Coil Resistance (Ω) 19.0 - 22.0 [20°C (68°F)]

    Troubleshooting
    - Troubleshooting SymptomSuspect area Engine will not start or hard to startVapor hose damaged or disconnected Engine struggles to startMalfunction of the Purge Control Solenoid Valve Rough idle ...

    Schematic Diagrams
    - Schematic Diagram ...

    Other information:

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: In-car Sensor
    - Description The In-car air temperature sensor is built in the heater & A/C control unit.The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived inside temperature, is delivered to ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Hazard Lamp Switch
    - Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the front monitor.(Refer to AVN System - "Front Monitor") 3.Remove the hazard switch (A). - Installation 1.Install the hazard switch. 2.Install the front monitor. 3.Connect the negative (-) battery terminal. ...

    © 2023-2025 Copyright www.hysacr.com