Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Smart Key System / Specifications

- Specifications Smart Key Unit (IBU)

ItemsSpecification
Rated voltageDC 12V
Operating voltageDC 9 ~ 16V
Operating temperature-30°C ~ 75°C
LoadMax. 4.0mA (When welcome light function off)
(2.5mA increase When operation of Welcome Light. (60 days average))

Smart Key (FOB Key)
ItemsSpecification
BatteryLithium battery 3V 1EA (CR2032)
Distance30m from vehicle, RF : 30m, Passive(LF) : 0.7m
Battery lifeMore than 2 years (20 times / a day)
   
An inappropriately disposed battery can be harmful to the environment and human health.Dispose the battery according to your local law(s) or regulation.

Push buttons
5 (Door lock / unlock, Liftgate open, Panic, Button remote start)

Frequency(Rx)
125 kHz

equency(Tx)
433.92 Mhz

Numbers
2EA


Antenna
ItemsSpecification
Rated voltageDC 12V
Operating voltageDC 9 ~ 16V
Operating temperature-22°F to 167°F (-30°C to 75°C)
Frequency125kHz
NumbersInterior(2EA), Door(2EA), Rear bumper (1EA)

    Components and Components Location
    - Component Location (1) 1. Integrated body control unit (IBU)2. Interior antenna 23. Door outside handle4. Interior antenna 15. Buzzer6. Door antenna - Component Location (2) 1. Bed ope ...

    Smart Key Diagnostic
    - Inspection Self Diagnosis With Scan Tool It will be able to diagnose defects of SMART KEY system with diagnostic tool quickly. diagnostic tool can operates actuator forcefully, input/output ...

    Other information:

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Condenser
    - Components Location 1. Condensor - Inspection 1.Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.Check the condenser connections for leakage, and rep ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Back-up Lamps
    - Removal 1.Disconnect (-) battery terminal. 2.Remove the rear bumper assembly.(Refer to Body - "Rear Bumper Assembly") 3.Disconnect the back-up lamp connector (A) and remove the mounting clips. 4.Loosen the mounting screws, push the clip (B) and remove the back-up lamp (A). - Installa ...

    © 2023-2025 Copyright www.hysacr.com