When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After adjusting, push the steering wheel both up and down to be certain it is locked in position.
Always adjust the position of the steering wheel before driving.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident.
To adjust the steering wheel angle and height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the desired angle (2) and distance forward/back (3).
3. Pull up the lock-release lever to lock the steering wheel in place.
CAUTION
While adjusting the steering wheel angle and height, please do not push or pull it hard since the fixture can be damaged.
Information
Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lock-release lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place.
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Oil hydraulic Motor(Actuator)
- Description
The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an
oil pressure. The pressure engages a multiple disk clutch to transfer
torque to the rear wheels. The torque to the rear wheels varies
according to the pressure on the clutch.
- Circuit Diagram
- ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Repair procedures
- Replacement
• Put on gloves to prevent hand injuries.
• Use seat covers to avoid damaging any surfaces.
1.Remove the front pillar trim.(Refer to Interior Trim - "Front Pillar Trim")
2.Remove the inside rear view mirror assembly.(Refer to Mirror ...