Hyundai Santa Cruz Owners & Service Manuals

Hyundai Santa Cruz: Maintenance / Washer Fluid

Checking the Washer Fluid Level

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used during summer months if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING

To prevent serious injury or death, take the following safety precautions when using washer fluid:

  • Do not use engine coolant or antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident or damage to paint and body trim.
  • Do not allow sparks or flame to contact the washer fluid or the washer fluid reservoir. Washer fluid may contain alcohol and can be flammable.
  • Do not drink washer fluid and avoid contact with skin. Washer fluid is harmful to humans and animals.
  • Keep washer fluid away from children and animals.
    Brake Fluid
    Checking the Brake Fluid Level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir ...

    Air Cleaner
    Filter Replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter. If soiled, the air cleaner fi ...

    Other information:

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Relay Box (Engine Compartment)
    - Inspection Power Relay (Type A) 1.There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals. 2.There should be no continuity between the No.30 and No.87 terminals when power is disconnected.[Engine room relay box] ...

    Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Seat Cushion Cover
    - Component Location 1. Front seat cushion cover - Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Put on gloves to prevent hand injuries.     • ...

    © 2023-2025 Copyright www.hysacr.com