Hyundai Santa Cruz: High Beam Assist (HBA) / High Beam Assist Operation

Display and control

• After selecting ‘High Beam Assist’ in the Settings menu, High Beam Assist will operate by following the procedure below.

- Place the headlamp switch in the AUTO position and push the headlamp lever towards the instrument cluster. The High Beam Assist () indicator light will illuminate on the cluster and the function will be enabled.
- When the function is enabled, high beam will turn on when vehicle speed is above 25mph (40km/h). When vehicle speed is is below 15 mph (25 km/h), high beam will turn off.
- The High Beam () indicator light will illuminate on the cluster when high beam is on.

• When High Beam Assist is operating, if the headlamp lever or switch is used, the function operates as follow:

- If the headlamp lever is pulled towards you when the high beam is off, the high beam will turn on without High Beam Assist canceled. When you let go of the headlamp lever, the lever will move to the middle and the high beam will turn off.
- If the headlamp lever is pulled towards you when the high beam is on by High Beam Assist, low beam will turn on and the function will turn off.
- If the headlamp switch is placed from AUTO to another position (headlamp/position/off), High Beam Assist will turn off and the corresponding lamp will turn on.

• When High Beam Assist is operating, high beam switches to low beam if any of the following conditions occur:

- When the headlamp of an oncoming vehicle is detected.
- When the tail lamp of a vehicle in front is detected.
- When the headlamp or tail lamp of a motorcycle or a bicycle is detected.
- When the surrounding ambient light is bright enough that high beams are not required.
- When streetlights or other lights are detected.

Information

• The images and colors in the cluster may differ depending on the cluster type or theme selected from the cluster.