Hyundai Santa Cruz: Lighting System / Specifications
| Items | Bulb Type | Bulb Wattage (W) | ||
| Front | Head lamp (STD) | Low | 9005L+ | 60 |
| High | 9005L+ | 60 | ||
| Head lamp (Option) | Low | LED | LED | |
| High | LED | LED | ||
| Turn signal lamp (STD) | PY28 | 28 | ||
| Turn signal lamp (Option) | LED | LED | ||
| Position lamp | LED | LED | ||
| Daytime Running Lamp (DRL) | LED | LED | ||
| Side Mark Lamp | LED | LED | ||
| Door mirror turn signal lamp | LED | LED | ||
| Rear | High mounted stop lamp | LED | LED | |
| Rear combination lamp | Tail lamp | I/S : OSRAM LA G6SP O/S : OSRAM LA E67F | I/S : 3.6 ~ 4.1W O/S : 2.1 ~ 2.7W | |
| Stop & Turn signal lamp | PY21 | 21 | ||
| Back up lamp | W5W | 5 | ||
| License plate lamp | W5W | 5 | ||
| Map lamp (STD) | W10W | STD : 10 | ||
| Map lamp (Option) | LED | LED | ||
| Room lamp | FESTOON | 10 | ||
| LED | LED | |||
| Vanity lamp | FESTOON | 5 | ||
Troubleshooting
- Troubleshooting
SymptomPossible causeRemedy
One lamp does not light(all exterior)Bulb burned outReplace bulb
Socket, wiring or ground faultyRepair if necessary
Head lamps do not lightBulb burn ...
Head Lamps
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the front bumper assembly.(Refer to Body - "Front Bumper Assembly")
3.Disconnect the head lamp connector (A).
4.Loosen the ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Front Door Belt Outside Weatherstrip
- Replacement
1.Remove the outside rear view mirror.(Refer to Mirror - "Outside Rear Viwe Mirror")
2.Pull down the front door window glass to the lowest level by pressing the power window glass switch.
3.Remove the front door belt outside weatherstrip (A).
4.To install, reverse removal pro ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Rear Center Seat Belt Retractor
- Components Location
1. Rear center seat belt retractor
- Replacement
• When installing the belt, make sure not to damage the retractor.
1.Remove the patition upper trim.(Refer to Interior Trim - "Patition Upper Trim")
2.Loosen the mounting bolt, remove the re ...
