Hyundai Santa Cruz: Engine Control / Fuel System / Special Service Tools
| Tool (Number and name) | Illustration | Application |
| 09353-24100 Fuel Pressure Gauge |
| Measuring the fuel line pressure |
| 0K353-D4100 Fuel Pressure Gauge Adapter |
| Connection between the high pressure fuel pump and fuel feed line. ※ SST No. 09353-02100 model also can be used. |
| 09353-L1100 Injector Combustion Seal Guide & Sizing Tool |
| Installation injector combustion seal. |
| 09392-1Y100 Heated Oxygen Sensor Socket Wrench |
| Removal and installation of the heated oxygen sensor ※ SST No. 09392-2H100 model also can be used for removing the heated oxygen sensor. |
| 09314-L1100 Torque Wrench Socket |
| Tighten the high pressure fuel pipe flange nut. |
| 09310-B8100 Fuel pump plage cover remover |
| Removal and installation of the fuel pump |
Specifications
- Service Data
Fuel Delivery System
ItemsSpecification
Fuel TankCapacity67 lit. (17.7 U.S.gal., 70.8 U.S.qt., 58.9 Imp.qt.)
Fuel FilterTypePaper type
Fuel PressureLow Pressure Fuel Line480 - 52 ...
Troubleshooting
- Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' ResistanceThe measured
resistance ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Refrigerant Line
- Components
1. Suction & Liquid Pipe Assembly
- Replacement
1.If a compressor is available, the air conditioner is operated for a
few minutes in the engine idle state and then the engine is stopped.
2.Disconnect the negative (-) battery terminal.
3.Recover the refrigerant wi ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Bed Trim Assembly
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
[Bed Side Panel Trim Assembly]
1.Remove the C pillar inner garnish.(Refer to Body S ...
