Hyundai Santa Cruz: Steering System / Special Service Tools
| Tool (Number and Name) | IIIustration | Use |
| 09568-2J100 Ball joint remover |
| Removal of the tie rod end ball joint. |
| 09568-4R100 Lower arm ball joint remover |
| Removal of the lower arm ball joint. |
Specifications
- Specifications
ItemSpecification
TypeElectric Power Steering System
Steering gearTypeRack & Pinion
Rack stroke152 ± 1 mm (5.98 ± 0.04 in)
Steering angle (Max.)Inner36.9˚ (+0.5˚/-1.5˚ ...
Troubleshooting
- Troubleshooting
SymptomProbable causeRemedy
Play in steeringLoose yoke plugRetighten
Loose steering gear mounting boltsRetighten
Loose or worn tie rod endRetighten or replace as necessary
St ...
Other information:
Hyundai Santa Cruz 2021-2025 Owners Manual: Interior Care
Interior general precautions
Prevent caustic solutions such as
perfume and cosmetic oil, from
contacting the interior parts because
they may cause damage or discoloration.
If they do contact the interior parts,
wipe them off immediately. See the
instructions for the proper way to clean
vinyl. ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Side Sill Molding
- Replacement
• When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Put on gloves to prevent hand injuries.
1.Remove the side seal molding (A).
2.To install, reverse the removal procedure.
...
