Hyundai Santa Cruz: Manual Heating and Air Conditioning / Fan speed control
.jpg)
The fan speed can be set as desired by pushing the fan speed control button.
Increased air flow is delivered with higher fan speeds.
Pressing the OFF button turns off the fan.
NOTICE
Operating the fan when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan when the engine is running.
Air conditioning
.gif)
Push the A/C button to turn the air conditioning system on (indicator light will illuminate). Push the button again to turn the air conditioning system off.
OFF mode
.gif)
Push the OFF button to turn the climate control system off. However, you can still operate the mode and air intake buttons as long as the ignition switch is in the ON position.
Air intake control
The air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).
Recirculated air position
With the recirculated air
position selected, air from t ...
Multi Air Mode
ON
When the Multi-Air mode button is
pressed, air flow is directed to the
face level and floor level and through
perforated sections along the instrument
panel for the driver and passenger. The ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Ambient Sensor
- Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor;
resistance will increase with lower temperature, and decrease with
higher temperature.The sensor output will be used for discharge
t ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Repair procedures
- Replacement
• When removing the fender, wrap protective tape around a screwdriver or remover not to damage components
• Put on gloves to prevent hand injuries
1.Remove the front bumper.(Refer to Front Bumper - "Front Bumper Assembly")
2.Remove the head lamp.(Refe ...
