Hyundai Santa Cruz: Multifunction Switch / Specifications
| Items | Specifications | |
| Rated voltage | DC 12V | |
| Operating temperature range | -22 to +176°F (-30°C to +80°C) | |
| Rated load | Dimmer & passing switch | High : 0.2A (Relay load) Low : 0.2A (Relay load) Passing : 0.2A (Relay load) |
| Lighting switch | Lighting : 0.2A (Relay load) (High, Low, Auto) | |
| Turn signal switch | 6.6A | |
| Fog lamp switch | 0.2A (Relay load) | |
| Wiper & mist switch | Low : 4.5A (Motor load) High : 4.5A (Motor load) Intermittent : 0.25mA Lock : Max. 28A (Motor load) Washer : 4.0A (Motor load) | |
| Rear wiper & washer | Wiper : 1.0A (Relay load) Washer : 4.0A (Motor load) | |
Components and Components Location
- Components
1. Steering column2. Lighting swtich3. Wiper switch4. Clock spring5. Steering wheel6. Driver airbag (DAB)
...
Repair procedures
- Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the clock spring.(Refer to Restraint - "Driver Airbag(DAB) and Clock Spring")
3.Disconnect multifunction switch assembly conne ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Intake Manifold
- Components
1. Intake manifold2. Intake manifold stay3. Electronic throttle contorl (ETC) gasket4. Electronic throttle contorl (ETC)5. Purge control solenoid valve (PCSV) and hoses6. Intake manifold gasket
- Removal and Installation
1.Disconnect the negative battery terminal.
2.Remov ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Crankshaft Damper Pulley
- Removal and Installation
1.Remove the engine room under cover.(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.Remove the drive belt and water pump belt.(Refer to Drive Belt System - "Drive Belt")
3.Remove the crankshaft damper pulley (A).Tightening torque :114.7 - 120 ...
