A vehicle’s electrical system is protected from electrical overload damage by fuses.
This vehicle has 5 fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment.If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken.If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating.
If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved. Immediately consult an authorized HYUNDAI dealer.
WARNING
NEVER replace a fuse with anything but another fuse of the same rating.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Pressure Sensor
- Description
The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an
oil pressure. And then it presses a multiple disk clutch and transfers
the generated torque into rear wheels. Its torque value varies according
to a pressure status. • Component location
- Circuit Di ...
Hyundai Santa Cruz 2021-2025 Owners Manual: Electronic Parking Brake (EPB)
Applying the parking brake
To apply EPB (Electronic Parking Brake):
1. Depress and hold the brake pedal.
2. Pull up the EPB switch.
Make sure the Parking Brake warning
light comes on.
EPB (Electronic Parking Brake) may be
automatically applied when:
Requested by other systems
The driver turns ...