Hyundai Santa Cruz: Engine Control / Fuel System / Engine Control System
- Components and Components Location
- Description and Operation
- Engine Control Module (ECM)
- ETC (Electronic Throttle Control) System
- Manifold Absolute Pressure Sensor (MAPS)
- Intake Air Temperature Sensor (IATS)
- Boost Pressure Sensor (BPS)
- Ambient Temperature Sensor (ATS)
- Engine Coolant Temperature Sensor (ECTS)
- Crankshaft Position Sensor (CKPS)
- Camshaft Position Sensor (CMPS)
- Knock Sensor (KS)
- Heated Oxygen Sensor (HO2S)
- Rail Pressure Sensor (RPS)
- Oil Pressure & Oil Temperature Sensor (OPTS)
- Accelerator Position Sensor (APS)
- Fuel Tank Pressure Sensor (FTPS)
- Injector
- Purge Control Solenoid Valve (PCSV)
- Variable Force Solenoid (VFS)
- Fuel Pressure Control Valve (FPCV)
- Canister Close Valve (CCV)
- E-CVVT motor
- RCV Control Solenoid Valve
- Electric Waste Gate Actuator (EWGA)
Troubleshooting
- Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' ResistanceThe measured
resistance ...
Components and Components Location
- Components Location
1. ECM (Engine Control Module)2. Manifold Absolute Pressure Sensor (MAPS)3. Intake Air Temperature Sensor (IATS)4. Boost Pressure Sensor (BPS)5. Engine Coolant Temperatu ...
Other information:
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Components and Components Location
- Components
[2WD]
1. Rear shock absorber2. Rear lower arm3. Rear stabilizer bar4. Rear sub frame 5. Rear upper arm 6. Rear assist arm 7. Trailing arm
[4WD]
1. Rear shock absorber2. Rear lower arm3. Rear stabilizer bar4. Rear differential carrier5. Rear sub frame6. Rear driveshaft7. ...
Hyundai Santa Cruz (NX4A OB) 2021-2025 Service Manual: Repair procedures
- Inspection
Operation and Leakage Check
1.Brake Booster (A)(1)Check brake operation by applying the
brake during the test run. If the brake does not operate properly,
replace the brake booster. If brake fluid remains inside the booster
when disassembled, replace the booster and master ...
